Designing Simulation or Embedded Systems?
Start Here!
WE ARE RFONICS, your Subject Matter Experts (SME) in Embedded & Simulation Systems: Avionics, Autonomous Vehicles, Stores, RADAR, RF, EW, Ground Stations, Rugged AI, Automotive, Imaging, and Medical Devices.
We work with engineers, sourcing agents and program management to specify optimal systems components for their projects.
If you want to discuss solutions for your project, Call us at 425-760-7142 or submit a Contact Us form below.
SUBSCRIBE TO OUR BLOGS, VIDEOS, NEWLETTERS &/or WHITE PAPERS BELOW!
Highlighted Products
If you are interested in downloading data sheets for any of our products, click the button on the right. If you are already a member, you will be redirected to our products. If you are not, you will be redirected to a free sign up page to gain access immediately. For more products you can visit our partner site.
-
The SBC3901 is a 3U VPX real-time GPU with the NVIDIA® Jetson AGX Orin (Industrial) GPU, having 2048 CUDA® cores, 64 Tensor Cores, DL and vision accelerators, 64GB DRAM, 64DB storage and 100/25GBE. The 3901 is aligned with Compute Intensive slot profile of SOSA, ideal for deep learning (DL) algorithms and autonomous and embedded edge computing systems.
-
3U VPX IO Intensive SBC with Jetson AGX Orin, Aligned to SOSA Standard
-
Rugged 3U VPX Single Board Computer with Intel® Xeon® W Processor (11th Generation Intel Core i7 Technology) and aligned to SOSA™ Standard. The SBC3513 offers memory resources including 64 GB of high speed DDR4 SDRAM and up to 480 GB NAND Flash (NVMe SSD), plus a range of I/O including DisplayPort™, USB, GPIO and serial comms.
-
Multi-Channel Wideband 7GHz FMC with up to 6 GSPS 12-bit RF ADC and up to 12GSPS 16-bit RF DAC
-
The GVC1001 is an ultra-high performance graphics, vision and AI computer aimed at SWaP-sensitive platforms primarily within ground vehicles, aviation, naval, and industrial platforms.
-
Eight-slot 3U VPX Starter Cage Development System
-
The PNT500 from Abaco Systems provides high precision position, navigation and timing information, even in highly contested environments, providing vital situational awareness.
Featuring QinetiQ’s Q40, the PNT500 solves several key pieces of this challenge, giving confidence in the location information available. Rather than rely on a single Global Navigation Satellite System (GNSS) source, such as GPS, PNT500 can use multiple sources of positioning data from different GNSS constellations. It obtains the frequency bands independently so even if GPS L1 is jammed it still provides a PNT output.
-
Rugged 3U VPX Single Board Computer with Intel Core i7 Processor (13th Generation Intel Core™ Technology)
Blog Posts
Videos
Our Latest Video
In this video Abaco presents their MOSA C5ISR demonstrator which they developed with partners and includes: SBC3513L Battle Management processor, Ethernet Switch card with compliance to SOSA, MORA, CMFF/MOSA Vetronics demonstration system requirements. This video is hosted on Military Embedded’s YouTube.
Hit your browser refresh if the video is not showing.
All of our Videos are accessible through the category buttons. This one is our latest video. Our videos are typically interviews on technology, system architecture, or a particular design methodology.
White Papers
See Descriptions to the Right ->
To download papers, click the button below.
You will be redirected to the membership account to download.
-
Having a plug and play CMFF component system has been the dream of the industry ever since the introduction of standardized PCs.
While the SOSA standard provided a pathway to get there, it really took the MOSA Vetronics requirements to provide an impetus for an almost plug-n-play concept to take shape.
Shortly, we will release a review of just how this is taking shape with Abaco those with whom they partnered to provide a technology demonstrator.
For now, grab the RFI in our documents.
-
Reliability and safety are prerequisites for any certified aircraft design project, and aviation has long mandated certification. The FAA issued AC 20-115 in 1982 to call attention to DO-178 as a means of achieving approval for software and AC 20-152 in 2005 to call attention to DO-254 as a means of achieving flight certification approval for electronics hardware. That leaves project cost and resource allocation as primary decisions for any new aviation design. Companies choosing to build certifiable aircraft systems, focusing on the function of the system rather than re-inventing the computer, can achieve significant cost advantages.
-
This guide provides an introduction to the MIL-STD-1553 data bus, its history, applications, and use. It describes: • The physical elements that make up the bus. • The protocol, including the message formats, word types, and command and status words. • Status word bits and mode commands and their definitions and use, both from the remote terminal and bus controller perspective. • Issues such as bus loading, major and minor frame timing, and error recovery.
-
This document provides an overview of ARINC 429 and other ARINC protocols. ARINC 429 is the most commonly used data bus for commercial and transport aircraft. This document explains the origins of the ARINC Corporation, the data bus specification and where ARINC 429 is used. Then it summarizes the principal electrical and data characteristics, which are defined in the specification
-
Advanced embedded system vision a reality – two rugged SBC3511 3U VPX single board computers, designed to align with the SOSA standard, acting as hosts to Abaco’s RAR15X high density MIL-STD-1553 and ARINC 429 XMC front I/O module.
“After we gave the contractor real hardware and firmware to evaluate, its system engineering team accepted our recommendation over other options because it is a tailorable, allin-one solution,” says Muller. “It provides the processing capacity, memory, anti-intrusion cybersecurity and chip technology the contractor needed. We also provided a software development kit.”
Meet OUR LEADERSHIP
-
Rob Harris is a results-driven professional dedicated to enhancing the profitability, performance, and value of high-tech innovative companies. He accelerates customer value in the marketplace by leveraging his deep understanding of fundamental business disciplines and his ability to forge strategic partnerships.
Rob has focused on technology solutions to U.S. Government, Military, and Aerospace clients, and the Original Equipment Manufacturers whose technology includes embedded systems, high-speed computing, high-speed switching, data acquisition, communications, as well as testing, measurement, emulation, and simulation solutions.
Rob’s personal passion is working with at-risk children, families facing homelessness, and individuals battling addictions and similar affliction
-
Bill Schuh is a solutions-driven professional who applies his broad scientific background and keen intuition to resolve a challenge quickly. He has created Business Development, Sales, Support and Engineering Teams and architected test solutions and embedded products in avionics, stores, mission systems and troubleshot systems on multiple platforms, including F15.
Similar to Rob Harris, Bill has spent most of his career working solutions for the U.S. Government, Military, and Aerospace clients, and the Original Equipment Manufacturers in those areas for both start-ups and established multi-nationals. Bill also spent over a decade in the design and FDA regulatory compliance of medical devices, biotech processes, separation systems & plant design, including MRP, Water, and HVAC systems.
Bill’s personal passion is the development of young adults into industry leaders, pole vault, creating stories and getting the Good News out.
-
Jacque Shadle is a master at business development, strategic planning, operational leadership and fiscal responsibility. These capabilities combined with her deep market understanding in clinical operations, pharmaceutics and robotics make Jacque successful when working at the C level, solving a customer issue or closing a difficult sale.
Jacque has developed product markets, improved customer satisfaction, established online education systems, interfaced with government regulatory entities, developed long-term development strategies and operated as Chief Executive Officer.
-
Madison Graham applies her solid understanding in sales strategies, team dynamics, and market trends to consistently exceed targets and achieve goals. Leading by example and inspiration, Madison also motivates her teams to exceed their own expectations by proficient decision making, team efficiency and encouraging professional development.
Madison’s understanding of market analysis, client relations and operational requirements enabled her to simultaneously oversee 14 sites while developing a national sales division. This strategic plan resulted in the addition of multiple key accounts and an expansion into new markets.
Our Partner
Abaco Systems products and solutions can be found in many high profile military/aerospace sea, land and air programs, as well as in commercial and industrial organizations in which rugged reliability is mission-critical.
Contact us
Contact us
If you have questions or want to subscribe, hit the CONTACT US banner. Our corporate contact is in the footer.
Our tech support number is 425-760-7142 which is available 0700-1900PT.